Products & Services Catalog

HCS-50 EVSE 40 A, 9.6 k W, H ardwired , R uggedized C onnector

SHOP NOW

Stay fully charged with the HCS-50 EV Charger. This Level 2 charging station is permanently mounted on a wall or pedestal and is rated for indoor or outdoor use. Charge up to 38 miles of range per hour plugged in with 9.6 kW of power. Keep equipment organized with a 25 ft charging cable that hangs up neatly on an integrated cable wrap and holster. Cables and connectors stay off the ground and last longer protected from dust, dirt, and rollovers. Rugged HCS EV Chargers are built for extreme weather conditions and high-traffic use with an impact-resistant J1772 connector and a 5-year limited warranty in the United States. These EV chargers are safety certified and work with every EV sold in North America.

D etails y 40 A of power, ideal for plug-in electric vehicles like the Kia Soul, Ford Focus, Honda Clarity, and Volvo C40. y Rugged, fully sealed NEMA 4 enclosure for indoor or outdoor installation. y Backed by Enphase’s 5-year limited warranty and outstanding customer service. y 25 feet of charging cable for flexible installation and usability. y Keep your charging cord neatly stowed with the integrated cable wrap and free connector holster. y Impact and crush resistant J1772 connector with Type 4X watertight and corrosion-resistant rubber overmolded EV connector. y No on/off switch required, saving power with minimal standby power consumption. y In the event of a minor power fault, automatic circuit reclosure timer will re-check conditions to begin charging again as soon as possible, if needed.

HCS-50 S eries S pecifications Electrical Specifications

HCS-50 (HARD-WIRED)

HCS-50 (PLUG-TYPE)

Input Voltage/Input Voltage Range Input Voltage Frequency Circuit Breaker Requirement

208/240 VAC (L-L), single-phase/185 VAC – 264 VAC

50/60 Hz

Dedicated, two-pole 50A

Input Cable Type Input Cable Length

Pre-wired with: (L1, L2, Gnd) 8 AWG service whip

Pre-wired with: NEMA 14-50P or NEMA 6-50P

3' (914.4 mm)

12" (304.8 mm)

Maximum Output Current/Output Power

40 A continuous/9.6 kW

Output Cable/Cable Length

Pre-wired with SAE J1772/25' (7.62 m)

Mechanical Data Enclosure Dimensions (L x W x D)

19.7" x 8.9" x 5.3" (500 mm x 226 mm x 135 mm)

Weight

13.5 lbs. (6.1 kg)

Enclosure Mounting

Wall or pedestal mounted (pedestal sold separately)

Environmental Specifications Environment Rating Operating/Storage Temperature

Indoor/outdoor rated

-22°F to 122°F (-30°C to 50°C)/-40°F to 176°F (-40°C to 80°C)

Enclosure Rating Features 4 LED Indicators

NEMA Type 4 - watertight

Amber LED: Power, Green LED: Charging, 1st Red LED: Power fault, 2nd Red LED: Charging fault

Warranty

5 years

Locations: Chicago, IL | Des Moines, IA | Kansas City, KS | Minneapolis, MN | Omaha, NE | St. Louis, MO Corporate: 1250 Ambassador Blvd., St. Louis, MO 63132

2-14