Products & Services Catalog

Automatic Watering Control

AUTOMATIC WATERING CONTROL

SHOP NOW

The Automatic Watering Control will monitor the battery voltage to determine when the battery charge is complete. After the charge has been completed, the control will allow water to flow to the battery for a fixed period of time depending on the battery voltage.

The control can be mounted to the side or top of the charger, on the front panel or door of the charger. The control is designed to operate with a gravity feed or pressure regulated supply system up to 15 PSI. The plumbing supply lines should be copper, PVC or plastic tubing. The water supply line to the battery should only be connected once a week—not every time the battery is charged. Please allow additional time for custom assembly of FC1000's.

FC1000-24 (24 Volt) FC1000-36 (36 Volt) FC1000-48 (48 Volt) FC1000-80 (80 Volt)

08TUB6 Clear Tubing 1/4" (6 mm) (Sold separately by the foot)

09FBLU6 Female Connector 1/4" (6 mm) (Sold separately)

09GRF6 Female Connector 1/4" (6 mm) (Sold separately)

09FWM6 Flow Indicator 1/4" (6 mm) (Sold separately)

HYDROMETER

REFRACTOMETER The Refractometer is used to measure fluid concentrations of liquids. It can be used to measure specific gravity as well as determine the identity of unknown substances based on their refractive index.

The Hydrometer is used to check specific gravity. It can be used on batteries with and without automated systems by removing the vent caps.

09HYCT Hydrometer 1.10 - 1.30 Range

09REFR Refractometer

09HYDE Hydrometer Replacement Tube

Locations: Chicago, IL | Des Moines, IA | Kansas City, KS | Minneapolis, MN | Omaha, NE | St. Louis, MO Corporate: 1250 Ambassador Blvd., St. Louis, MO 63132

1-168